Agilent Technologies 660MHz Welding System User Manual


 
95
3
3Specifications
In this chapter you will find the specifications of the Agilent 81130A
Pulse Generator and its output modules Agilent 81131A and Agilent
81132A.
At the end of this chapter, Pulse Parameter Definitions on page 111
provides detailed information on the definition of the pulse parameters
used by the instrument.
NOTE
Warranted Performance
Specifications describe the instruments warranted performance. Non-
warranted values are described as typical. All specifications apply after a
30 minute warm-up phase with 50 Ohm source, a 50 Ohm load resistance
and separate channels. They are valid from 0 °C to 55 °C ambient
temperature.