Filter
Top Products
59
Programming Reference
SCPI Instrument Command List
Specified Limits
<n> = 0 to 4 (integer)
Description
Use this command to store a complete instrument setting from memory
<n> to file filename in the current directory on the memory card.
Memories 1 to 4 are the internal memories. Use memory 0 to store the
current instrument setting to a file.
Examples
:MMEM:LOAD:STAT 1,""FREQPERF""
Load FREQPERF into memory 1
:MMEM:LOAD:STAT 0,""AMPTEST""
Load AMPTEST as current setting
:*SAV 2
Save current setting in memory 2
:MMEM:STOR:STAT 2,""SETTING2""
Store memory 2 to file SETTING2
:*RCL 3
Recall memory 3 as current setting
Command
:OUTP[1|2]
Long
:OUTPut[1|2][:NORMal][:STATe]
Form
Set & Query
Parameter
ON | OFF | 1 | 0
*RST value
OFF
Description
Use this command to switch the normal OUTPUTs on or off.
Example
:OUTP1 ON
Switch on OUTPUT 1
:OUTP2 OFF
Switch off OUTPUT 2
Command
:OUTP[1|2]:COMP
Long
:OUTPut[1|2]:COMPlement[:STATe]
Form
Set & Query
Parameter
ON | OFF | 1 | 0
*RST value
OFF
Description
Use this command to switch the complement OUTPUTs on or off.
Example
:OUTP1:COMP ON
Switch on complement OUTPUT 1
:OUTP2:COMP OFF
Switch off complement OUTPUT 2