Filter
Top Products
The Agilent 816x VXIplug&play Instrument Driver Using Visual Programming Environments
220 Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
If you do not see this driver in the list, the driver has not installed properly.
6 Enter the Parameters to the init() call by entering GPIB::xx::INSTR where
xx is your instrument’s GPIB address.
7 Select whether to Perform Reset or to Perform Identification Query
whenever Agilent VEE opens the instrument for interaction.
8 Confirm the selections pressing the OK button.
9 Return to the Instrument Manager screen and press the Save Config to
save the configuration.
If you do not see this driver in the list, the driver has not installed properly.
NOTE
20 is the default GPIB address for your instrument.
NOTE