Filter
Top Products
2-7
Cisco 800 Series Routers Hardware Installation Guide
78-5373-04
Chapter 2 Installation
Installing Your Router
Server, PC, or
workstation
Cisco 801 and 802
routers: Ethernet port
Cisco 803 and 804
routers: Ethernet port Ø
Straight-through OUT N/A
Server, PC, or
workstation
Cisco 802 IDSL router:
Ethernet port
Cisco 804 IDSL router:
Ethernet port 1
Straight-through OUT N/A
Server, PC, or
workstation
Cisco 803 and 804
routers:
Ethernet ports 1, 2, 3
Straight-through N/A
3
N/A
Server, PC, or
workstation
Cisco 804 IDSL router:
Ethernet ports 2, 3, 4
Straight-through N/A
4
N/A
1. Cisco provides a yellow straight-through cable. You provide crossover or additional straight-through cables. For details on
cables, refer to Appendix B, “Specifications and Cables.”
2. Hub vendors choose different names for the button controlling cable selections. This table uses the Cisco 1528 Micro Hub
10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your particular hub. Refer to
your hub documentation for details.
3. On Cisco 803 and Cisco 804 routers, the HUB/NO HUB button affects only Ethernet port Ø.
4. On Cisco 804 IDSL routers, the TO HUB/TO PC button affects only Ethernet port 1.
Table 2-2 Connecting Ethernet Devices (continued)
Network Device
Connected to Router Router Port
Ethernet Cable
Type
1
Router HUB/NO
HUB, TO
HUB/TO PC
Button Setting
Network
Device
Button
Setting
2