Filter
Top Products
Glossary
GL-3
Cisco 800 Series Routers Hardware Installation Guide
78-5373-04
S
straight-through
Ethernet cable
A cable that wires a pin to its equivalent pin. This cable connects two dissimilar
devices, for example, a data terminal equipment (DTE) and a data
communications equipment (DCE) device. A straight-through Ethernet cable is
the most common cable used.
T
TO HUB/TO PC
button
The Cisco 802 IDSL and Cisco 804 IDSL routers provide a TO HUB/TO PC
button that is equivalent to the HUB/NO HUB button on the other Cisco 800
series routers. This button is associated with the Ethernet port on the Cisco 802
IDSL router and with Ethernet port 1 on the Cisco 804 IDSL router. The setting
of this button determines the cable type (straight-through or crossover) that you
will use to connect an Ethernet device.
telephone cable
The cable used to connect a device to a telephone port.