Filter
Top Products
TRAVELING CUT-OFF SAW
CTS Series
TPES014/0603
SPECIFICATIONS
UGE058/0803 CTS Saw
DESCRIPTION 2-6
MODELS CTS-5 CTS-7 CTS-9
Performance characteristics
Pipe capacity in. {mm} OD 5 {127} 7 {178} 9 {229}
Profile capacity in. {mm} HxW* 4 x 8 {102 X 203} 5x13 {127 X 330} 6X17 {152 X 432}
Blade size in. {mm} 18 {457} 23 {584} 27 {686}
Blade type carbide tipped carbide tipped carbide tipped
Blade drive motor Hp {kW} 3 {2.2} 5 {3.7} 5 {3.7}
Feed direction
†
Right to left Right to left Right to left
Dimensions in. {mm}
A - Height 57 {1448} 60 {1524} 63 {1600}
B - Height to centerline 40 {1016} 40 {1016} 40.4 {1026}
C - Width 46.5 {1181} 57 {1448} 61 {1549}
D - Length 70 {1778} 88 {2235} 88 {2235}
E - Table Travel 24 {609} 24 {609} 24 {609}
Weight lbs. {kg}
‡
Installed 575 {261} 825 {374} 1700 {771}
Shipping 675 {306} 925 {420} 1800 {817}
Voltage Total Amps
§
230V/3 phase/60 Hz 9.7 A 15.1 A 15.1 A
460V/3 phase/60 Hz 4.9 A 7.6 A 7.6 A
230V/3 phase/60 Hz (servo) 26.2 A 30.6 A 30.6 A
460V/3 phase/60 Hz (servo) 13.1 A 15.3 A 15.3 A
Compressed air requirement
Pressure psi {bars} 80 {5.52} 80 {5.52} 80 {5.52}
Consumption ft
3
/m {liter/sec} 5 {2.4} 7 {3.3} 8 {3.8}
NPT fitting size 3/8 in. 3/8 in. 3/8 in.
SPECIFICATION NOTES:
* The HxW dimension is provided for guidance only.The actual capacity can vary depending on the profile you are
trying to produce.
† Left to right feed direction is available as an option.
‡ If the optional chip collection system is ordered, add 50 lbs.{22.7 kg} to to the installed and shipping weights.
§ The optional chip collection system adds 6 A on 230V models;3 A on 460V models.
CTS-5, CTS-7 AND CTS-9
Front View
Side View
A
B
C
D
E