Filter
Top Products
Appendix B-1 (10)
MENU AREA
Menu function key is used to access the various Menu
areas. There are two menus Maint. and Factory, with access
via password to various sub-menus.
Menus are a convenient way to access parameters that do
not need to be altered often, i.e. table speeds and encoder
direction. In addition, preventive maintenance parameters
can be monitored for scheduling purposes.
Maint. Softkey
Located under the word Maint. is the Maintenance soft key.
The Maintenance area is password protected. This area
should only be accessed by qualified personal. After
pressing the Maintenance Softkey, the password entry
screen is displayed.
With the numeral keys press 6 2 0 9 then the Enter key to
access the maintenance area. An improper password will
cause this message to be displayed for 3 seconds.
Conair Servo
Traveling Saw
Operator Control
Instructions
SELECT MENU
Maint. Factory
ENTER PASSWORD
****
THE PASSWORD ENTERED
WAS INCORECT!