Filter
Top Products
Appendix B-1 (1)
The Operator Control provides an intuitive user-friendly
method to interface with the Conair Servo Traveling Saw.
Information is viewed and entered at the Operator Control
and is communicated to the servo positional amplifier via
the RS-232 serial communication link.
The Operator Control is a flat membrane panel consisting
of 22-keys and a large 2 line x 20 back lit LCD screen.
Soft Keys
Soft keys - these are the three keys directly under the
display. All three have a triangle on them. Occasionally,
pages will appear that allow the operator to use one of the
soft keys. On those occasions, text would typically appear
directly above the key and the key will have a function.
Think of the text as the soft key function indicator or title.
Conair Servo
Traveling Saw
Operator Control
Instructions
CONAIR SERVO SAW
Version 1.1