Craftsman 315.22038 Saw User Manual


 
Check all loose parts from the box with the list below. Use the instructions on the following pages to assemble.
All fasteners are shown actual size.
,
Saw Base To Leg Stand Assembly
A. Saw Assembly (not shown) ........................... 1
B. Leg Stand Assembly (not shown) .................. 1
C, Hex bolt (5/16-18 x 5/8 in. Hex Head) ........... 4
D. Washer (5/16 in.) ........................................... 8
E. Lock washer (5/16 in.) ................................... 4
F. Hex Nut (5/16-18) ........................................... 4
C D E F
9. Fence .................................................................. 1
6. Hardware for Front Table
A. Front table ...................................................... 1
B. Screw (I/4-20 x 1 in.)..................................... 4
C. Washer (1/4 in.) ............................................. 4
D. Lock washer (1/4 in.) ..................................... 4
E. Hex nut (1/4-20) ............................................. 4
l c'tor
10. Leveling Hardware for Front Table
A. Screw (114-20 x 1-3/4 in.) .............................. 1
B. Washer ........................................................... 1
C. U-clip .............................................................. 1
D. Setscrew ........................................................ 1
E. Tee nut ........................................................... 1
A B
D E
A. Screw ............................................................. 4
B. Speed Nut ...................................................... 2
C. Indicator ......................................................... 2
D. Switch Key ..................................................... 2
8. Spacer Table ...................................................... 1
Fig. 6B
13 CRRFTSMflN"RADIALSAW315,220380