Filter
Top Products
Back to Contents Page
Keyboard Tray
Dell™Latitude™X300ServiceManual
Removing the Keyboard Tray
Replacing the Keyboard Tray
Removing the Keyboard Tray
1. Remove the battery.
2. Remove the keyboard.
3. Remove the palm rest.
4. Remove the hinge covers.
5. Remove the display assembly.
6. Remove the five M2 x 4-mm screws that secure the keyboard tray to the system board.
7. Lift the keyboard tray up and slip out the antenna cables before lifting the tray out of the bottom case.
Replacing the Keyboard Tray
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
NOTICE: Disconnect the computer and any attached devices from electrical outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Before You Begin" before performing the following procedure.
NOTE: Each keyboard tray screw has an arrow beside it.
1
keyboard tray
2
M2 x 4-mm screws (5)
98MKC