Filter
Top Products
Back to Contents Page
Reserve Battery
Dell™Latitude™X300ServiceManual
Removing the Reserve Battery
Replacing the Reserve Battery
Removing the Reserve Battery
1. Remove the battery.
2. Remove the keyboard.
3. Remove the palm rest.
4. Disconnect the reserve battery cable from the system board connector.
5. Disconnect the speaker cables.
6. Pry the reserve battery free from the bottom case. The reserve battery is attached to the bottom case with a piece of adhesive tape.
7. Remove any remnants of the adhesive tape from the bottom case.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
NOTICE: Disconnect the computer and any attached devices from electrical outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Before You Begin" before performing the following procedure.
NOTICE: Do not pull on the reserve battery cable. Pull from the reserve battery connector to disconnect the cable.
1
reserve battery
W2662
2
reserve battery cable
3
reserve battery connector
4
system board connector