Filter
Top Products
Back to Contents Page
System Board
Dell™Latitude™X300ServiceManual
Removing the System Board
Replacing the System Board
Removing the System Board
1. Remove the battery.
2. Remove the keyboard.
3. Remove the palm rest.
4. Remove the hinge covers.
5. Remove the display assembly.
6. Remove the keyboard tray.
7. Remove the hard drive.
8. Remove the memory module.
9. Remove the Mini PCI card, if present.
10. Remove the modem card, if present.
11. Remove the three M2 x 4-mm screws that secure the system board to the bottom case.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
NOTICE: Disconnect the computer and any attached devices from electrical outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Before You Begin" before performing the following procedure.
NOTE: Each system board screw has an arrow beside it.