Filter
Top Products
103
5.7 SAS JBOD expansion
5.7.1 Connecting JBOD
D-LINK controller suports SAS JBOD expansion to connect extra SAS dual JBOD controller.
When connecting to a dual JBOD which can be detected, it will be displayed in “Show PD
for:” of “/ Volume configuration / Physical disk”. For example, Local, JBOD 1 (D-
LINK DSN-6020), JBOD 2 (D-LINK DSN-6020), …etc. Local means disks in local
controller, and so on. The hard drives in JBOD can be used as local disks.
Figure 5.7.1.1
(Figure 5.7.1.1: Display all PDs in JBOD 1.)
“/ Enclosure management / Hardware monitor” can display the hardware status of
SAS JBODs.