Filter
Top Products
114
Figure 5.11.4
Create replication job on the source IP SAN storage
1. If the license key is activated on the IP SAN storage correctly, a new Replication tab
will be added on the Web UI. Click “Create” to create a new replication job.
Figure 5.11.5
2. Select the source virtual disk which will be replicated to the target IP SAN storage and
click “Next”.
Figure 5.11.6
Tips
If the messa
g
e displays that there is not enou
g
h space for creation, please
refer to the section of Configure the snapshot space below for solution.
3. Enter the IP address of iSCSI port on controller 1 of the target IP SAN storage. Click
“Next” to continue.