Filter
Top Products
45
Most UNIX systems build in syslog daemon.
“Event log filter” setting can enable event log display on “Pop up events” and “LCM”.
4.3 iSCSI configuration
“iSCSI configuration” is designed for setting up the “Entity Property”, “NIC”,
“Node”, “Session”, and “CHAP account”.
Figure 4.3.1
4.3.1 NIC
“NIC” can change IP addresses of iSCSI data ports. DSN-6410/6420 has two 10GbE
ports on each controller to transmit data. Each of them must be assigned to an IP address
and be set up in multi-homed mode, or the link aggregation / trunking mode has been set
up. When there are multiple data ports setting up in link aggregation or trunking mode, all
the data ports share single address.
Figure 4.3.1.1
IP settings:
User can change IP address by checking the gray button of LAN port, click “IP settings
for iSCSI ports”. There are 2 selections, DHCP (Get IP address from DHCP server) or
static IP.