Filter
Top Products
70
Figure 4.4.6.1
1. Select “/ Volume configuration / RAID group”.
2. Click “Create“.
3. Input a RG Name, choose a RAID level from the list, click “Select PD“ to choose the
RAID physical disks, then click “OK“.
4. Check the setting. Click “OK“ if all setups are correct.
5. Done. A RG has been created.
Figure 4.4.6.2
(Figure 4.4.6.2: Creating a RAID 5 with 3 physical disks, named “RG-R5”.)
Step 2: Create VD (Virtual Disk).
To create a data user volume, please follow the procedures.