Filter
Top Products
29
Chapter 3 Quick setup
3.1 Management interfaces
There are three management methods to manage D-LINK IP SAN storage, describe in
the following:
3.1.1 Serial console
Use console cable (NULL modem cable) to connect from console port of D-LINK IP SAN
storage to RS 232 port of management PC. Please refer to figure 2.3.1. The console
settings are on the following:
Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control.
Terminal type: vt100
Login name: admin
Default password: 123456
3.1.2 Remote control
SSH (secure shell) software is required for remote login. The SSH client software is
available at the following web site:
SSH Tectia Client: http://www.ssh.com/
PuTTY: http://www.chiark.greenend.org.uk/
Host name: 192.168.0.32 (Please check the DHCP address first on LCM.)
Login name: admin
Default password: 123456
Tips
D-LINK product supports SSH for remote control only. For usin
g
SSH, the
IP address and password are required for login.