Filter
Top Products
50
Figure 4.3.3.3
5. Go to “/ iSCSI configuration / CHAP account” page to create CHAP account.
Please refer to next section for more detail.
6. Check the gray button of “OP.” column, click “User”.
7. Select CHAP user(s) which will be used. It’s a multi option; it can be one or more. If
choosing none, CHAP can not work.
Figure 4.3.3.4
8. Click “OK”.
9. In “Authenticate” of “OP” page, select “None” to disable CHAP.
Change portal:
Users can change the portals belonging to the device node of each controller.
1. Check the gray button of “OP.” column next to one device node.
2. Select “Change portal”.
3. Choose the portals for the controller.
4. Click “OK” to confirm.
Figure 4.3.3.5