Filter
Top Products
73
Figure 4.4.6.7
(Figure 4.4.6.7: Slot 4 is set as a global spare disk.)
Step 5: Done.
Delete VDs, RG, please follow the below steps.
Step 6: Detach a LUN from the VD.
In “/ Volume configuration / Logical unit”,
Figure 4.4.6.8
1. Check the gray button next to the LUN; click “Detach”. There will pop up a
confirmation page.
2. Choose “OK”.
3. Done.
Step 7: Delete a VD (Virtual Disk).
To delete the virtual disk, please follow the procedures:
1. Select “/ Volume configuration / Virtual disk”.
2. Check the gray button next to the VD number; click “Delete”. There will pop up a
confirmation page, click “OK”.
3. Done. Then, the VD is deleted.
Tips
When deleting VD directly, the attached LUN(s) of to this VD will be
detached together.
Step 8: Delete a RG (RAID group).