Filter
Top Products
126
ERROR SATA PRD mem fail Failed to init SATA PRD memory manager
ERROR SATA revision id fail Failed to get SATA revision id
ERROR SATA set reg fail Failed to set SATA register
ERROR SATA init fail Core failed to initialize the SATA adapter
ERROR SATA diag fail SATA Adapter diagnostics failed
ERROR Mode ID fail SATA Mode ID failed
ERROR SATA chip count
error
SATA Chip count error
INFO SAS port reply error SAS HBA port <number> reply terminated abnormally
INFO SAS unknown port
reply error
SAS frontend reply terminated abnormally
INFO FC port reply error FC HBA port <number> reply terminated abnormally
INFO FC unknown port
reply error
FC frontend reply terminated abnormally
EMS events
Level Type Description
INFO Power install Power(<string>) is installed
ERROR Power absent Power(<string>) is absent
INFO Power restore Power(<string>) is restored to work.
ERROR Power fail Power(<string>) is not functioning
WARNING Power detect PSU signal detection(<string>)
INFO Fan restore Fan(<string>) is restored to work.
ERROR Fan fail Fan(<string>) is not functioning
INFO Fan install Fan(<string>) is installed
ERROR Fan not present Fan(<string>) is not present
ERROR Fan over speed Fan(<string>) is over speed
WARNING Thermal level 1 System temperature(<string>) is higher.
ERROR Thermal level 2 System Overheated(<string>)!!!
ERROR Thermal level 2
shutdown
System Overheated(<string>)!!! The system will auto-
shutdown immediately.
ERROR Thermal level 2
CTR shutdown
The controller will auto shutdown immediately, reason
[ Overheated(<string>) ].
WARNING Thermal ignore
value
Unable to update thermal value on <string>
WARNING Voltage level 1 System voltage(<string>) is higher/lower.
ERROR Voltage level 2 System voltages(<string>) failed!!!
ERROR Voltage level 2
shutdown
System voltages(<string>) failed!!! The system will auto-
shutdown immediately.
ERROR Voltage level 2 CTR
shutdown
The controller will auto shutdown immediately, reason
[ Voltage abnormal(<string>) ].
INFO UPS OK Successfully detect UPS
WARNING UPS fail Failed to detect UPS
ERROR UPS AC loss AC loss for system is detected
ERROR UPS power low UPS Power Low!!! The system will auto-shutdown
immediately.
WARNING SMART T.E.C. Disk <slot> S.M.A.R.T. Threshold Exceed Condition occurred
for attribute <string>
WARNING SMART fail Disk <slot>: Failure to get S.M.A.R.T information
WARNING RedBoot failover RedBoot failover event occurred
WARNING Watchdog
shutdown
Watchdog timeout shutdown occurred
WARNING Watchdog reset Watchdog timeout reset occurred