D-Link DSN-6410 Tool Storage User Manual


 
130
INFO PD upgrade started JBOD <name> PD [<string>] starts upgrading firmware
process.
INFO PD upgrade
finished
JBOD <name> PD [<string>] finished upgrading firmware
process.
WARNING PD upgrade failed JBOD <name> PD [<string>] upgrade firmware failed.
INFO PD freed JBOD <name> PD <slot> has been freed from RG <name>.
INFO PD inserted JBOD <name> disk <slot> is inserted into system.
Warning PD removed JBOD <name> disk <slot> is removed from system.
ERROR HDD read error JBOD <name> disk <slot> read block error
ERROR HDD write error JBOD <name> disk <slot> write block error
ERROR HDD error JBOD <name> disk <slot> is disabled.
ERROR HDD IO timeout JBOD <name> disk <slot> gets no response
INFO JBOD inserted JBOD <name> is inserted into system
WARNING JBOD removed JBOD <name> is removed from system
WARNING SMART T.E.C JBOD <name> disk <slot>: S.M.A.R.T. Threshold Exceed
Condition occurred for attribute <string>
WARNING SMART fail JBOD <name> disk <slot>: Failure to get S.M.A.R.T
information
INFO PD dedicated spare Assign JBOD <name> PD <slot> to be the dedicated spare
disk of RG <name>.
INFO PD global spare Assign JBOD <name> PD <slot> to Global Spare Disks.
ERROR Config read fail Config read error occurred at LBA <address>-<address> of
JBOD <name> PD <slot>.
ERROR Config write fail Config write error occurred at LBA <address>-<address> of
JBOD <name> PD <slot>.
WARNING PD read error Read error occurred at LBA <address>-<address> of JBOD
<name> PD <slot>.
WARNING PD write error Write error occurred at LBA <address>-<address> of JBOD
<name> PD <slot>.
INFO PD scrub started JBOD <name> PD <slot> starts disk scrubbing process.
INFO PD scrub completed JBOD <name> PD <slot> completed disk scrubbing process.
WARNING PS fail Power Supply of <string> in JBOD <name> is FAIL
INFO PS normal Power Supply of <string> in JBOD <name> is NORMAL
WARNING FAN fail Cooling fan of <string> in JBOD <name> is FAIL
INFO FAN normal Cooling fan of <string> in JBOD <name> is NORMAL
WARNING Volt warn OV Voltage of <string> read as <string> in JBOD <name> is
WARN OVER
WARNING Volt warn UV Voltage of <string> read as <string> in JBOD <name> is
WARN UNDER
WARNING Volt crit OV Voltage of <string> read as <string> in JBOD <name> is
CRIT OVER
WARNING Volt crit UV Voltage of <item> read as <string> in JBOD <name> is
CRIT UNDER
INFO Volt recovery Voltage of <string> in JBOD <string> is NORMAL
WARNING Therm warn OT Temperature of <string> read as <string> in JBOD <name>
is OT WARNING
WARNING Therm warn UT Temperature of <string> read as <string> in JBOD <name>
is UT WARNING
WARNING Therm fail OT Temperature of <string> read as <string> in JBOD <name>
is OT FAILURE
WARNING Therm fail UT Temperature of <string> read as <string> in JBOD <name>
is UT FAILURE
INFO Therm recovery Temperature of <string> in JBOD <name> is NORMAL