Filter
Top Products
113
3. If you want the replication port to be on special VLAN section, you may assign VLAN ID
to the replication port. The setting will automatically duplicate to the other controller.
Create backup virtual disk on the target IP SAN storage
1. Before creating the replication job on the source IP SAN storage, user has to create a
virtual disk on the target IP SAN storage and set the type of the virtual disk as
“BACKUP”.
Figure 5.11.3
2. The backup virtual disk needs to be attached to a LUN ID before creating replication
job. And the virtual disk of “BACKUP” type can only be attached with “Read-only”
permission to prevent it from being modified accidentally.