Filter
Top Products
Storage
312079A 29
Storage
Short Term Storage
(up to 2 days)
1. Turn AllControl to OFF. Pause 2-3 seconds to
allow pressure to be relieved, then turn to
STORAGE.
2. Engage trigger lock.
3. Leave gun attached to hose.
4. Remove tip and guard and
clean with water or flushing
solvent. A soft brush can be
used to loosen and remove
dried on material if needed.
5. Wipe paint off outside of gun using a soft cloth
moistened with water or flushing solvent.
Long Term Storage
(more than 2 days)
1. HOPPER METHOD: Place prime tube in waste
pail. Pour 8 oz. of Pump Armor into hopper.
IMMERSION METHOD: Place suction tube in
Pump Armor storage fluid bottle and prime tube
in waste pail.
2. Set AllControl to
PRIME/CLEAN PUMP.
3. When storage fluid comes out
of prime tube (5-10 seconds)
turn AllControl to OFF.
4. Wait 2-3 seconds to allow
pressure to be relieved, then
turn AllControl to STORAGE.
ti9168a
Pause
2-3 Seconds
ti9174a
ti8923a
ti9671a
• Always circulate Pump Armor storage fluid
through system after cleaning. Water left
in sprayer will corrode and ruin pump.
• Follow Shutdown and Cleaning
instructions starting on page 20 or 23.
TIA
OR
Hopper Method
Immersion Method
ti9169a
ti9168a
ti917
4