Filter
Top Products
Getting Started
8 312079A
AllControl
™
Settings
Setup
Project Painter 5 can be used as either a hopper or
direct immersion sprayer.
Hopper Method (Primary Spray Method)
1. Stand sprayer upright
to verify the suction
tube is securely and
properly connected to
fitting (a) and hopper
elbow (b). If they are
not, connect suction
tube and tighten
securely.
2. Return sprayer to horizontal position.
3. Set AllControl to OFF. Engage
gun trigger lock.
4. Unscrew tip and guard
assembly from gun.
5. Uncoil hose and connect
one end to gun. Use two
wrenches to tighten
securely.
STORAGE - long term and
overnight shutdown and storage
HI SPRAY - uses high pressure
to direct fluid to spray gun
OFF - turns motor off for short
term shutdown and relieves
system pressure
PRIME/CLEAN PUMP - turns
motor on and directs fluid to
prime tube
ROLL - directs low pressure
fluid to roller (when used)
PRIME/CLEAN GUN & HOSE -
directs fluid to gun and hose
LOW SPRAY - uses low pressure
to direct fluid to spray gun
SETTING INDICATOR -
selects function
a
b
ti9294a
ti9168a
ti9204a
ti9203a