Filter
Top Products
SECTION 2: CIRCUIT REQUIREMENTS
Serious personal injury could occur if you
connect the machine to the power source
before you have completed the setup pro-
cess. DO NOT connect the machine to the
power source until instructed to do so.
220V Single-Phase
Plug/Receptacle Type
Grounding
Amperage Draw
Circuit Requirements
If
you are unsure about the wiring codes in your
area or you plan to connect your machine to a
shared circuit, consult a qualified electrician.
Electrocution or fire could
result if this machine is
not grounded correctly
or if your electrical con-
figuration does not comply
with local and state codes.
Ensure compliance by
checking with a qualified
electrician!
Extension Cords
Figure 4.