Floor Load
Machine Data Sheet Page 3
Placement Location
Figure 8
Children and visitors may be
seriously injured if unsuper-
vised. Lock all entrances to
the shop when you are away.
DO NOT allow unsupervised
children or visitors in your
shop at any time!
Site Considerations
Site Considerations
220V, Single-Phase
* 60"
‡ 77-1/4"
* 17-3/8"
‡ 22-1/16"
Motor
* Footprint
‡ Minimum Working Clearance
Figure 8.
NOTICE
We strongly recommend securing your
machine to the floor if it is hardwired to the
power source. Consult with your electrician
to ensure compliance with local codes.
Figure9
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Bolting to Concrete Floors
Figure 9
Mounting to Shop
Floor
Mounting to Shop Floor