Filter
Top Products
Loose hair and clothing
could get caught in the
lathe and cause serious
personal injury. Keep
loose clothing and long
hair away from moving
parts of lathe.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used a wood lathe before,
WE STRONGLY RECOMMEND that you
read books, trade magazines, or get for-
mal training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Adjusting Headstock
To position the headstock along the length of
the lathe bed:
1.
2.
Figure 17
Figure 17.
3.
Note: The large clamping hex nut under-
neath the headstock will require occasional
adjusting to ensure proper clamping pressure
of the headstock to the bed. Turn this hex nut
in small increments to fine tune the clamping
pressure as needed.
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear a face shield and
respirator when operating this machine.