Filter
Top Products
-12- G0504 16" Horizontal Resaw Bandsaw
1. Infeed Pressure Rollers—Maintain down-
ward pressure on the board to keep it sturdy
during cutting.
2. Head Elevation Motor—Responsible for
moving the head (the part of the saw that
contains the wheels and blade) up or down
as needed.
3. Electrical Control Box—Main area for wir
-
ing, rewiring, and changing the fuses. Should
never be opened when the machine is con
-
nected to the power source!
4. Infeed Conveyor—Moves the board through
the bandsaw blade during cutting.
5. Infeed Conveyor Engagement Lever
—
Allows the operator to stop and start the
infeed conveyor while the blade is moving.
6. Control Panel—The part of the resaw where
the operator can control the starting and
stopping of the motor, the various height
changes, and the calibration of the blade
height to the conveyor. The control panel
also houses a load meter that allows the
operator to monitor the load being placed on
the resaw during operation. For more details,
see Page 14.
Figure 7. Main view of machine features and controls.
2
4
5
3
6
1
Main Features
SECTION 4: MACHINE FEATURES