Filter
Top Products
G0504 16" Horizontal Resaw Bandsaw -15-
After all the parts have been removed from
the shipping crate, you should have:
• Resaw Bandsaw Machine
• Bandsaw Blade 180" x 1" x 0.035"
• Tool Box
• T-Handle Wrench 19mm
• 7 pc. Combination Wrench Set
—10, 12, 13, 14, 17, 19, 21 mm
• 7 pc. Hex Wrench Set
—2.5, 3, 4, 5, 6, 8, 10 mm
• Phillips Head Screwdriver
• Flat Head Screwdriver
• Adjustment Wrench 30 x 32 mm
In the event that any non-proprietary parts are
missing (e.g. nuts or washers), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard
-
ware store.
The Model G0504 is shipped from the manu-
facturer in a carefully built crate. If you discover
the machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663
for advice.
Save the containers and all packing materials
for possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con
-
dition of your shipment, you should inventory the
equipment from the shipping crate.
The purpose of this section is to guide you
through the required
steps to get your machine
out of its crate and into operating condition.
Wear safety glasses
during the entire set up
process!
This machine presents
serious injury hazards
to untrained users. Read
through this entire man
-
ual to become familiar
with the controls and
operations before start
-
ing the machine!
Figure 10. Piece inventory from packing crate.
Piece Inventory
Unpacking
About this Section
SECTION 5: SET UP