Filter
Top Products
Model T25920/T25926 (Mfd. Since 08/14)
-7-
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 3. RPM display on headstock.
Use descriptions and figures below to become
familiar with basic controls of your lathe.
ON/OFF Switch: Turns power ON/OFF to lathe
motor, which rotates spindle.
Belt Tension Lever: Releases tension on belt to
change speeds or replace belt.
Spindle Speed Dial: Adjusts speed of the spindle
within current belt position speed range.
Figure 5. Typical tailstock controls.
Quill Handwheel: Moves quill in and out to allow
clamping or releasing of workpiece.
Quill Lock Lever: Locks quill in place to prevent
loosening during operation of lathe.
Tailstock Lock Lever: Unlocks tailstock to allow
quick position adjustments.
Quill Handwheel
Quill Lock Lever
Tailstock Lock
Lever
Figure 4. Tool rest control levers.
Tool Rest
Tool Rest
Lock Lever
Base Lock
Lever
Tool Rest: Provides a stable resting position for
turning tools.
Tool Rest Lock Lever: Locks tool rest in position
relative to tool rest base.
Base Lock Lever: Lock and unlocks tool rest
base and allows it to be repositioned along lathe
bed.
Figure 2. Tension lever and ON/OFF switch.
ON/OFF
Switch
Belt Tension Lever
Spindle
Speed Dial
RPM Display: Displays spindle speed in revolu-
tions per minute (RPM).
RPM Display