Filter
Top Products
Model T27313 (Mfd. Since 01/15)
-3-
Controls &
Components
Refer to Figure 1 and the following descriptions
to become familiar with the basic controls of this
machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
D. Tool Locking Collar: Hardware that keeps
cutting tool locked in place.
E. Quill: Moves cutting tool mounted in the car-
riage toward or away from the workpiece.
F. Carriage: Main housing for quill, cutting tool,
and tool locking collar. Moves longitudinally
along copy attachment bed.
G. Stylus: Controls depth of cut.
H. Crossfeed Handwheel: Controls crossfeed
leadscrew, which sets maximum cutting tool
depth. Turning clockwise decreases cutting
depth and turning counterclockwise increas-
es cutting depth.
I. Tail Center Adjustment Knob: Adjusts
position of tail center. Used to hold master
spindle in place.
J. Bed: Main body of copy attachment to which
all other parts attach.
K. Template Support: Brackets that allow tem-
plates to securely mount to copy attachment.
A. Longitudinal Feed Cable: Cable that con-
nects carriage to longitudinal feed wheel
allowing carriage to travel along copy attach-
ment bed.
B. Adjustable Carriage Stop: Limits carriage
travel along length of copy attachment bed.
C. Longitudinal-Feed Handwheel: Rotating
clockwise moves carriage to the left, rotating
counterclockwise moves carriage to the right.
A
B
C
D
E
F
G
H
I
J
K
Figure 1. T27313 controls and components.