Filter
Top Products
SKU 93762 For technical questions, please call 1-800-444-3353. Page 13
To Attach The Pulley Cover:
1. Position the Pulley Cover (72) over the Worm Shaft (9) and Motor Shaft (81).
Align the mounting hole in the Pulley Cover with the mounting hole in the Body
Frame (60). Then secure the Pulley Cover to the Bandsaw, using one Hex Bolt
(76) and one Flat Washer (77). (See Figure H.)
FIGURE G
STOCK STOP (157)
SOCKET HEAD SCREW (156)
SHAFT (158)
HEX BOLT (149)
PULLEY COVER
(72)
WORM SHAFT
(9)
MOTOR SHAFT
(81)
BODY FRAME
(60)
HEX BOLT (76)
FLAT WASHER (77)
FIGURE H
To Attach The Spindle Pulley And Motor Pulley:
1. Slide the Spindle Pulley (1) fully onto the Worm Shaft (9). Then secure the
Spindle Pulley to the Worm Shaft, using one Socket Head Screw (2).
(See Figure I,
next page.
2. Insert the Shaft Key (80) in the slot on the Motor Shaft (81). Align the slot in the
END VIEW
WITH
HAND WHEEL (171)
IN FOREGROUND