Filter
Top Products
SKU 95668 For technical questions, please call 1-800-444-3353 PAGE 5
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Wood Shaper. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Wood Shaper.
3. Do not force the Wood Shaper. This tool will do the work better and safer at
the speed and capacity for which it was designed.
4. WARNING!Keephandsandngersawayfromthecuttingarea.Use a
“push stick” (not included) when necessary.
5. Never leave the Wood Shaper unattended when it is plugged into an
electrical outlet. Always unplug the unit from its electrical outlet before leaving.
SERVICE
1. Toolservicemustbeperformedonlybyqualiedrepairpersonnel.Service
or maintenance performed by unqualied personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
6. Industrial applications must follow OSHA guidelines.
7. Never stand on the Wood Shaper. Serious injury could result if the unit is
tipped.
8. Always unplug the Wood Shaper from its power supply source before
performing any inspection, maintenance, or cleaning procedures.
9. Keep all guards in place and in proper working order.
10. Never place your hands within 12 inches of the Cutters. Never pass your
hands directly over or in front of the Cutter. As one hand approaches the 12 inch
radius point, move it in an arc motion away from the Cutter to the outfeed side
and reposition that hand more than 12 inches beyond the Cutter.
11. Donotshapestockshorterthan12incheswithoutspecialxturesorjigs
(not included). Where practical, shape longer stock and cut to size.