Filter
Top Products
CHAPTER 11
Echo Software
StudioPix™ Pixelation Luminaire User Manual 93
Updating Fixture Software
Complete Fixture Software Update
To upgrade SHOWPIX or StudioPix fixture firmware, you will need to download the latest version
of Echo software from the website to your computer. When you download Echo, it will contain
the latest SHOWPIX and StudioPix fixture software for upgrading fixtures on your DMX link.
Note: Any stock content updates will also be contained in each new version
of Echo software, (see
Updating Stock Content on page 82).
If there is a SHOWPIX or StudioPix fixture software update to download from the website, run
the installer and it will automatically load into the Echo application on your hard drive. The next
time you launch Echo, the latest fixture software will be available to upgrade fixtures on the
link.
The latest software can always be found on the High End Systems website on the SHOWPIX or
StudioPix support page (
http://www.highend.com/support/LED).
To update fixtures:
1. Under the Device Menu, select Upgrade Devices. A Software
Upgrade Wizard will prompt you to select which fixtures on the
link you want to upgrade. All units are listed by their Unique ID.
2. The next screen lets you choose a fixture type (SHOWPIX or
StudioPix).
3. Click in the check box beside each fixture you want to upgrade.
4. Click Finish to automatically upgrade those devices.