Filter
Top Products
CHAPTER 3
The Menu System
18 StudioPix™ Pixelation Luminaire User Manual
Changing the Display Output (DSPL)
You can manually turn the fixture’s alphanumeric LED display on or off. If you want to remotely
change the display output (using a DMX console), see
Control Function Options on page 34.
To turn the display off:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the DSPL menu. Press <Enter> to select.
4. Scroll to ON to set the LED display to normal intensity.
5. Press <Enter> to store.
Inverting Pan (P/IN)
This menu item inverts the direction of the pan motor, to allow fixtures mounted opposite each
other horizontally to respond to pan movement commands in the same direction.
To invert the fixture’s pan motion:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the P/IN menu. Press <Enter> to select.
4. Scroll to ON to invert the fixture’s pan motion, or OFF to return the fixture’s pan motion to
normal orientation.
5. Press <Enter> to store.
Inverting Tilt (T/IN)
This menu item inverts the direction of the tilt motor, to allow fixtures mounted opposite each
other vertically to respond to tilt movement commands in the same direction.
To invert the fixture’s tilt motion:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the T/IN menu. Press <Enter> to select.
4. Scroll to ON to invert the fixture’s tilt motion, or OFF to return the fixture’s tilt motion to
normal orientation.
5. Press <Enter> to store.