Filter
Top Products
SAFETY
HUSQVARNA-13
Maintenance
Never make adjustments with the engine running.•
Disengage the drive units, shut off the engine and •
wait until all moving parts come to a complete
stop before making adjustments, performing
maintenance or cleaning the machine.
Disconnect the spark plug cable before beginning •
repair work.
Keep all components in serviceable condition and •
make sure all nuts, bolts and other hardware are
tight. Replace worn or damaged decals.
Be careful when checking work tools. Use gloves •
when performing maintenance work.
Never allow persons not trained in the use of the •
machine to perform service on it.
Always park the machine on even ground before •
performing maintenance or making adjustments.
Do not disassemble the engine. This can •
invalidate the engine warranty. Contact the dealer
for questions regarding service or guarantee
matters. Follow all maintenance instructions.
Do not change the setting of governors and avoid •
running the engine with overly high RPM. If the
engine is run too fast, damage to the machine
components can occur.
Do not modify safety equipment. Check regularly •
to be sure it works properly. The machine must
not be run with defective or disassembled safety
equipment.
The mufer is designed to maintain sound levels at •
an approved level and keep direct exhaust away
from the user. Exhaust gases from the engine are
extremely hot and may contain sparks that can
cause res or burn the user.
Never use a machine with a defective mufer.•
Reduce the risk of re by removing grass, leaves •
and other debris that may have caught in the
machine.
8011-027
Remove the spark plug cable.
8011-210c
Keep the machine clean.
WARNING!
Wait until all moving parts are
completely still before performing
maintenance on the machine. Turn
off the engine and remove the spark
plug cable.