INSTALLATION / HANDLING
23
enhttp://air.ingersollrand.com
60/50Hz IRN 20HP/ 15 kW IRN 25HP / 18.5 kW
TAS
non−TA S
TAS
non−TA S
COMPRESSOR
Nominal pressure
PSIG (bar)
150
(10.34)
150
(10.34)
Flow rate @ 150 PSIG (10.3 bar)
ACFM (m
3
/MIN)
1,
4
75
(2.12)
77
(2.18)
92
(2.61)
94
(2.66)
Flow rate @ 125 PSIG (8.6 bar)
ACFM (m
3
/MIN)
2,
4
80
(2.27)
83
(2.35)
99
(2.80)
102
(2.89)
Flow rate
@ 115 PSIG (8 bar) ACFM (m
3
/MIN)
3,
4
84
(2.38)
87
(2.46)
105
(2.97)
108
(3.06)
Airend discharge temperature. 228_F (109_C) Trip point
Ambient operating temperature
(min.) → (max.)
35_F (+2_C) → 104_F (+40_C)
MOTOR
Nominal power 20HP / 15kW 25HP / 18.5kW
Insulation class F
COOLING SYSTEM − Air cooled
Cooling air flow 1900ft
3
/min (53.8m
3
/min)
Maximum ∆P in air ducts 0.25 inWg (6.4mmH
2
O)
Compressed air outlet ∆T N/A 15_F (8.3_C) N/A 20_F (11_C)
GENERAL DATA
Separation volume 1.8 gallons (7 Litres )
Coolant capacity 3.4 gallons (13 Litres )
Weight − base mount unit 1350 lbs (612 kg)
Weight − 120 gallon Receiver mounted 1720 lbs (780 kg)
Weight − 240 gallon Receiver mounted 1891 lbs (858 kg)
Weight − 500 Litre Receiver mounted 1772 lbs (804 kg)
Weight − 750 Litre Receiver mounted 1891 lbs (858 kg)
DRYER ENGINEERING DATA 50 / 60Hz
Electrical protection class (std) NEMA 1
(IP 20)
Factory refrigerant charge (oz/g) 23.5 oz
667 g
Refigeration type 134 A
1 Assuming a 5 psi (0.34 bar) pressure drop through the TAS module.
2 Assuming a 8 psi (0.55 bar) pressure drop through the TAS module.
3 Assuming a 9 psi (0.62 bar) pressure drop through the TAS module.
4 Flow rate will decrease as DP through the TAS module increases.