Filter
Top Products
..*-$ .
+*2 -21 V
*+/$*). ..*-$ .
./$&*+/$*).
& ..*-4&$/ CF
For stick welding. Includes 20 ft.
(6.1m) #6 electrode cable with lug,
15 ft. (4.6m) #6 work cable with
lugs, headshield, filter plate, work
clamp, electrode holder and sam-
ple pack of mild steel electrode.
& & - (*/ *0/+0/
*)/-*'
Requires K2909-1, 6-pin to 12-pin
adapter.
Portable current control provides the
same dial range as the current control on
the welder. Consists of a 6-pin Amphenol
connector which plugs into the remote
control Amphenol. 25 foot cable length.
/$"*+/$*).
+/
+H;C?KC?HEEB;:(E:;BI
&
PTA-17 TIG Torch (12.5 ft 3.8m)
2
CABLES
&
PTA-17 TIG Torch (25 ft 7.6m) 2 CABLES
+/
+H;C?KC?HEEB;:(E:;BI
&
PTA-26 TIG Torch (12.5 ft
3.8m)
2 CABLES
&
PTA-26 TIG Torch (25 ft 7.6m) 2 CABLES
&!**/(+/-*'
Requires K2909-1, 6-pin to 12-pin
adapter.
&!**/(+/-*'
(12-pin plug connection)
Depress pedal to increase current. Depressing pedal
fully achieves maximum set current. Fully raising the
pedal finishes the weld and starts the Afterflow cycle.
&#)(+/-*'
Requires K2909-1, 6-pin to 12-pin
adapter.
Provides 25 ft (7.6m) of remote cur-
rent control for TIG welding. (6-pin
plug connection).
&#)(+/-*'
Provides 25 ft (7.6m) of remote current control for TIG
welding. (12-pin plug connection).