Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TABLE D.2 – ENGINE MAINTENANCE PARTS
D-4
MAINTENANCE
D-4
POWER-ARC 4000
TABLE D.1
ENGINE MAINTENANCE SCHEDULE
Maintenance Every 5 Hours 25 Hours 50 Hours 100 Hours
Operation or Daily or Yearly or Yearly or Yearly 100-300 Hours
Check Oil Level ●
Change Oil ◆●Note 1
Clean Rotating Screen, Finger ●
Guard, or Debris Screen Note 2
Service Foam Pre-Cleaner
●
Note 2
Service Air Cleaner
●
(if no pre-cleaner) Note 2
Service Air Cleaner ●
(if pre-cleaner present) Note 2
Clean Cooling System ●
Inspect Spark Arrester (Option) ●
Clean or Replace Spark Plug ●
Replace In-Line Fuel Filter (Option) ●
Remove Combustion Deposits ●
◆ Change oil after first 5 hours, then after every 50 hours or once a year.
Note 1: Change oil every 25 hours when operating under heavy load in high ambient temperatures.
Note 2: Clean more often under dusty conditions or when airborne debris is present.
SPARK PLUG
(RESISTOR)
FUEL FILTER
AIR CLEANER
(PLEATED PAPER)
AIR
PRE-CLEANER
(AS NEEDED)
B&S 8 HP KOOL
BORE PART #
B&S 802592
Champion RJ19LM
B&S 394358
B&S 494511
B&S 492889
B&S 9 HP VAN-
GUARD PART #
B&S 491055
Champion RC12YC
Autolite 3924
None
B&S 710266
B&S 710268
B&S 8 HP INTEK
PART #
B&S 491055
Champion RC12YC
None
B&S 491588 (5043)
B&S 493537
HONDA PART #
NGK BPR6ES
DENSO W20EPR-U
None
5266721
(17210-ZE2-505)
2538429
(17218-ZE2-821)
(CAN BE CLEANED AND REUSED AS NEEDED)