Filter
Top Products
TROUBLESHOOTING AND REPAIR
F-23F-23
POWER MIG 200
TYPICAL OUTPUT VOLTAGE WAVEFORM - MACHINE LOADED
(MAX TAP “G”)
10.0 V 5 ms
0 Volts
This is a typical DC output voltage wave-
form generated from a properly operat-
ing machine. Note that each vertical
division represents 10 volts and that
each horizontal division represents 5
milliseconds in time. The machine was
loaded with a resistance grid bank.
NOTE: Scope probes connected at
machine output terminals: (+)
probe to electrode, (-) probe to
work.
Volts/Div.................................10V/Div
Horizontal Sweep.................5 ms/Div
Coupling........................................DC
Trigger....................................Internal
SCOPE SETTINGS
MACHINE LOADED TO 200 AMPS AT 22 VDC
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC