Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TROUBLESHOOTING & REPAIR
F-15 F-15
Classic III and IIID
ALTERNATOR
COVER
BRUSHES
WRAPAROUND
SLIP RINGS
FIGURE F.1 – ALTERNATOR COVER REMOVAL
ALTERNATOR ROTOR TEST (continued)
TEST PROCEDURE
1. Turn engine off.
2. With the 3/8" nut driver or socket wrench,
loosen the screws on the left and right
sides and bottom of the alternator wrap-
around. See Figure F.1.
3. With the 5/16" socket wrench, remove the
four screws from the alternator cover. See
Figure F.1.
4. Remove the alternator cover and wrap-
around. Be careful to clear the leads.
5. Locate and lift the brushes off of the rotor
slip rings. See Figure F.1.