Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
INSTALLATION
A-2 A-2
Classic III and IIID
TECHNICAL SPECIFICATIONS - CLASSIC III AND IIID
INPUT - ENGINE
Manufacturer Description Speed Displacement Ignition Capacities
Classic III: 4 cyl., 4 cycle 1725 RPM 164.7 cu. in. Electric Fuel: 15 gal.
Continental Water-cooled Full load (2700 cc) (57 liters)
TM27 Gasoline
38.9 HP @ 1800 RPM Oil: 7 qt.
1700 RPM High idle (6.7 liters)
Classic IIID: 4 cyl., 4 cycle 1350 RPM Water/coolant: 9.3 qt.
Continental Water-cooled Low idle (8.8 liters)
TMD27 Diesel
45 HP @
1700 RPM
RATED OUTPUT - WELDER
Duty Cycle Amps Volts at Rated Amperes
100% Duty Cycle 225 DC Constant Current 29V
50% Duty Cycle 300 DC Constant Current 32V
30% Duty Cycle 350 DC Constant Current 34V
OUTPUT - WELDER AND GENERATOR
Welding Ranges Max. Open Circuit Voltage Auxiliary Power
40-350 Amps DC 98.5 3.0 kVA of 115/230 V, 60Hz Power
26 Amps @ 115 V
(1)
13 Amps @ 230 V
PHYSICAL DIMENSIONS
Height Width Depth Weight
Classic III Classic IIID
40.94 in. 24 in. 66.25 in. 1406 lb. 1445 lb.
1040 mm 610 mm 1683 mm 638 kg 657 kg
1
15 amps can be drawn from either half of the receptacle. Total combined load of all receptacles cannot exceed 3.0 kVA.