Filter
Top Products
OM-203 185 Page 7
SECTION 3 − INTRODUCTION
The Induction Heating Temperature Station (IH/TS) is designed to be used with Induction Heating Systems for
pre-heat and post-heat (stress relieving) applications. The station is built in two different configurations; as a controller
only or as a controller with a digital recorder.
The controller in the IH/TS comes pre-programmed from the factory with a typical stress relieving temperature profile
that can be easily changed to match specific customer stress relief requirements. Also, the controller can be
programmed to operate in a pre-heat mode. These instructions will guide the operator in the proper use of the station
which includes programming and setting up the controller, and operating the recorder.