Filter
Top Products
OM-203 185 Page 11
4-6. Connecting 5kW System Cords And Cables
Connect the power output cable and
coolant lines as shown.
Connect 110-volt power cable as shown.
Plug the 110-volt cooler power cord into
the duplex at the rear of the power source
cart.
The IH/TS Control is plugged in the left
side duplex. Do not use these duplex
connections for operating auxiliary tools,
such as grinders, drills, lights, etc.
D Connect the “coolant out” line from
the cooler directly to the output ex-
tension cable.
D Connect the “coolant in” line on
the IH/TS directly to the remaining
output extension cable connection.
D Connect the “coolant out” line from
the IH/TS to the “coolant in” line on
the cooler.
803 040-A
Hose From Cooler To
Output Extension Cable
Hose From IH/TS To
Cooler
Hose From
Output Extension Cable
To IH/TS
Output
Connectors
Front Rear