Filter
Top Products
OM-203 185 Page 27
6-3-3-3. Stop Recording
1. Touch the block with the batch name.
2. Touch “Stop”.
3. Touch “Close” − screen returns to the home screen and displays “No Batch In Progress”.
If a batch file was not started, the temperature data is still recorded. The
Job# (Batch Name), User, Comments, and Recorder ID are not recorded.
NOTE
6-3-3-4. Saving Data To A Disk (Recommended After Each Batch)
1. Insert floppy disk into recorder.
2. Login as User (see Section 6-3-3-1).
3. Touch key in bottom right corner to open Root Menu.
4. Touch “Operator”.
5. Touch “Archive”.
6. Touch “Disk”.
7. Select how much data to save to floppy (typically, Last Day is sufficient).
Last day saves from 12:00am until current time. Last week saves from 12:00am Monday until current time.
Scroll down and wait until archive transfer changes from active to inactive.
DO NOT remove floppy disk before completion of data transfer.
NOTE
8. Touch key in bottom right corner to open Root Menu.
9. Touch “Home”.
10. Remove floppy disk.
11. To view data, go to Section 6-3-6.
6-3-3-5. Saving Data To A PC (Alternative To Floppy Disk)
6-3-3-5-1. Review Software − First Time Setup
1. Start “Review” software (see Section 6-3-7).
2. Click on “Instrument”, “Setup”, “TCP/IP”.
3. Click on “Add Instrument”.
4. In the “TCP/IP Address or Host Name:” field, type “192.168.111.222”.
5. In the “Identifier:” field, type “Generic”.
6. Click on “OK”.
6-3-3-5-2. Creating A Shortcut − First Time Setup
Local Area Network Connection (Windows) 2000)
1. Click on “Start”, “Settings”, “Control Panel”.
2. Open “Network and Dial-up Connections”.
3. Right click on “Local Area Connection”.
4. Select “Create Shortcut”.
5. Click on “Yes” to create a shortcut on the desktop.