Miller Electric IH Welder User Manual


 
OM-203 185 Page 28
6. Close the “Network and Dial-up Connection” window.
7. Close the “Control Panel”.
Network Connection (Windows) 95, 98, ME)
1. Click on “Start”, “Settings”, “Control Panel”.
2. Right click on “Network”.
3. Select “Create Shortcut”.
4. Click on “Yes” to create a shortcut on the desktop.
5. Close the “Control Panel”.
6-3-3-5-3. Changing IP Address To Connect The IH/TS
For Windows) 2000
1. Close any open network applications.
2. Double click “Local Area Connection” desktop shortcut.
3. Click on “Properties”.
4. Scroll down to “Internet Protocol (TCP/IP)”.
5. Click on “Internet Protocol (TCP/IP)” to highlight it.
6. Click on “Properties”.
7. Click on “Use the following IP address:”.
8. In the “IP address” field, type “192.168.111.221”.
9. Click on “OK”.
10. Click on “OK” to add the subnet mask.
11. The “Subnet mask:” field should display “255.255.255.0”.
12. Click on “OK”.
13. Click on “OK”.
14. Click on “Close” to close the “Local Area Connection” window.
For Windows) 95, 98, ME
1. Close any open applications (Windows will restart to apply settings).
2. Double click “Network” desktop shortcut.
3. Scroll down to “Internet Protocol (TCP/IP)”.
4. Click on “Internet Protocol (TCP/IP)” to highlight it.
5. Click on “Properties”.
6. Click on “Specify an IP address:”.
7. In the “IP address” field, type “192.168.111.221”.
8. Click on “OK”.
9. Click on “OK”.
10. Click on “Yes” to restart the computer and have changes take effect.
6-3-3-5-4. Downloading Files From Recorder
1. Connect a crossover cable between the IH/TS recorder and the PC (a crossover cable is a special network
cable with pins 2 and 3 reversed on one end).
2. Start “Review” software (see Section 6-3-7).