Miller Electric IH Welder User Manual


 
OM-203 185 Page 65
8-6. Calibration Certification Procedure
The following items are required for verifying calibration:
1. Fluke-714 Thermocouple Calibrator
this can be obtained from: http://www.fluke.com/products/home.asp?SID=13&AGID=9&PID=1707
specify primary standard certification when ordering.
2. Type-K Mini Connector (Fluke #80CK-M) Or Equivalent
this can be obtained from: http://thermo-electric-direct.com.control.interliant.com/
Miniature_Quick-Coupling_Thermocouple_Connectors10630.html
3. Type-K 2-Pin Male Connector
this can be obtained from: http://thermo-electric-direct.com.control.interliant.com/
Standard_Quick-Coupling_Thermocouple_Connectors7886.html
4. Calibration Labels Part No. QCC306BU BLUE
these can be obtained from: http://www.q-cees.com/itemdetail.asp?part=206
5. A length of type-K thermocouple wire connected between the type-K mini connector and type-K 2-pin
connector.
1. Fluke-714 Thermocouple
Calibrator
2. Type-K Mini Connector
3. Type-K 2-Pin Male Connector
4. Calibration Labels
1
2
3
4
Perform the procedure as follows:
1. Press the down arrow on bottom left of digital recorder to display numeric page.
. Allow readings to stabilize before recording.
2. Set Fluke-714 TC Calibrator to 382.0 degrees F.
a. Move TC Calibrator from TC1 through TC6 in sequence recording each value read onto the Certificate of
Calibration.
b. Verify readings are within ±3 degrees F of TC Calibrator.
. If readings are beyond the +3degrees F, the instrument will need to be returned to Eurotherm for repair.
Phone: 703-669-1316
E-mail: repairs@eurotherm.com
web page: www.eurotherm3.com/repairs.htm
c. Repeat at 882.0 degrees F and at 1382.0 degrees F
3. Save a copy of the Certificate using the IH/TS serial no. and date as the file name, i.e. “LB056241 062501” for
June 25, 2001.
4. Print a copy of the certificate to send with the IH/TS.
5. Complete calibration sticker and apply to IH/TS front panel below recorder.
I.D. No. (IH/TS serial no.)
By (your initials) Date (today’s date)
Due (date 1 year from today)