Filter
Top Products
13
6 Operation modes
6.1 Operation mode (default mode when power is turned on)
■Status check
Displays in Operation mode
Display
Descriptions
EMISSION switch.
Pressing it will start irradiation.
Stays on during irradiation.
READY
Indicates that irradiation is ready to start.
Stays on while irradiation is ready to start.
Stays off during irradiation.
CH1～4
Indicates CH selection and active CH during
irradiation. Also indicates temperature
warnings and errors.
Green: During selection
Orange: Temperature warning or error
Red: During irradiation
The “CH” indicators of 7-seg flash during
irradiation.
Green (7-seg) display
UV intensity modulation (0-100%)
LED replacement time (0.01-999 × 100 hrs)
CH of temp. warning or error (CH1-4)
UV intensity setting (“---,” 0.01-49.9 W/cm
2
)
Red (7-seg) display
Irradiation time (Con, 0.00-999 sec.)
LED head temp. (0-999TEMP)
Cumulative LED use (0-999 × 100 hrs)
Error code (E00~E99)
UV intensity setting (0.00-49.9 W/cm
2
)
%
Appears when UV intensity modulation is
displayed
sec
Appears when irradiation time is displayed
TEMP
Appears when LED temperature is displayed
×100hrs
Appears when LED replacement time and
cumulative LED use are displayed
W/cm2
Appears when UV intensity is displayed
LOCK
Settings are locked (no changes can be made)