Panasonic 35 Work Light User Manual


 
External control
41
4. Using the operation setting screen
[Settings 1]
1) Set UJ – Selects Type from 0 to 7 (does not switch CH selection).
*During Type selection Type Change is highlighted.
Read Reads the current Type setting from UJ35 controller into computer.
Write Uploads current Type from computer to UJ35 controller.
Cancel Cancels current Type setting operation and return to start.
2) “Switch Display”… Switches the display mode of the controller.
*Settable only when UJ35 controller is online.
• “% / SEC” For display of irradiation intensity and time.
• “TEMP” For display of head temperature.
• “×100hrs” For display of lifetime setting and cumulative irradiation time.
3) “INTERLOCK”… Locks and unlocks the UJ35 controller settings.
*Settable only when UJ35 controller is online.
• [INTERLOCK OFF] Switches interlock off (state on UJ35 controller side)
• [INTERLOCK ON] Sets interlock ON (highlighted on screen) (state on UJ35 controller side)
• ON/OFF Toggles UJ35 controller interlock ON and OFF