Filter
Top Products
Manual Operation
Fan Control
+
A − (Fan): Press + or − to
increase or decrease the fan speed.
The fan speed and indicator
appears in the display.
The climate control system sets
the fan speed automatically.
When the fan speed is adjusted the
system goes into semi-automatic
operation. Press the AUTO button to
return to automatic operation.
Temperature Control
Temperature Controls: The
temperature can be adjusted
separately for the driver and
the passenger. Turn the
temperature controls clockwise
or counterclockwise to increase or
decrease the temperature.
The temperature can be set
between 63°F (17°C) and
176°F (30°C). A setting between
72°F (22°C) and 75°F (24°C)
is recommended.
The temperature settings for each
side are shown in the display.
If the temperature control is past
86°F (30°C), the display shows
H (hottest). Turning it past
63°F (17°C), shows C (coolest).
The EXT TEMP (Exterior
Temperature) can be displayed in
Fahrenheit (°F) or Celsius (°C).
See DIC Vehicle Customization
on page 4-32.
ZONE: Press to set the climate
control to single-zone (SZ) mode or
dual-zone (DZ) mode. SZ or DZ
appears in the display when a mode
is set.
Single-Zone (SZ) Mode: All zones
are set to the same temperature.
The temperature is shown in the
display. Turn the ZONE control to
set the temperature.
Dual-Zone (DZ) Mode: Allows
different temperatures to be set for
the driver and passenger sides
or to link them. When linked,
the passenger side temperature
uses the same temperature setting
as the driver side.
Turn the AUTO control to set a
different temperature for the
passenger.
Press and hold the AUTO button
for at least three seconds to link
the passenger and driver side
temperatures. Linking automatically
occurs if the passenger and
driver sides are set to the same
temperature when the ignition
is turned on.
Air Delivery Mode Control
e*(Mode): Press to change the
current airflow mode. The current
mode selection appears in the
display screen. Changing the mode
cancels the automatic operation and
the system goes into semi-automatic
operation. Press AUTO to return to
automatic operation.
Climate Controls 7-5
2008 - Pontiac G8 Owner Manual